Van Norman
FG5000/FG10000 Flywheel
Grinders
Copyright © 2018, by Irontite Products Inc.
vii
800-553-5953
All Rights Reserved Rev. 181102
The Unique Table Design
The Van Norman Flywheel Grinders use a “floating” table design as illustrated
above. The vast majority of the downward force is displaced over a large pool of
special lubricating oil. This allows the table to be rotated without much force and
eliminates deflection. No need to replace table bearings and you can grind with
closer tolerances and greater pressures.
Note: When installing near interior walls, allow enough room to gain
access to service panels on the side and rear of the machine.
Coolant Tank
13.5” wide x 9” high x 22.5” deep
IMPORTANT: Notice the full and low coolant levels.
There must ALWAYS be coolant flowing over the baffle
panel or the pump WILL burn out from overheating.
