Appearance upon completion of Step 3.
3A. Insert one Upper Post (J) into the bracket of the Lower Post (B). Continue
holding the Upper Post (J) and align its holes with the holes of the Lower Post (B).
Insert three Hex Bolts (17) all the way through the Lower Post (B) and Upper Post
(J). Mount Upper Crossbeam (C) by inserting the threaded ends of the two Hex
Bolts (17) sticking out of Lower Posts (B) and Upper Post (J). Attach all three parts
by using:
6 - (52)
Washer D13.5xD24x2.5
3 - (76)
Nylon Nut M12
3 - (17)
Hex Bolt M12x1.75x85L
Tip: Keep the rectangular tab on the Upper Crossbeam (C) facing
forward.
3B. Insert the second Upper Post (J) into the bracket of the other Lower Post (B).
Continue holding the Upper Post (J) and align its holes with the holes of the Lower
Post (B). Insert three Hex Bolts (17) all the way through the Lower Post (B), the
Upper Post (J) and the Upper Crossbeam (C). Attach all three parts by using:
6 - (52)
Washer D13.5xD24x2.5
3 - (76)
Nylon Nut M12
3 - (17)
Hex Bolt M12x1.75x85L
Thoroughly tighten the hardware once complete.
STEP
3
14
