Appearance upon completion of Step 1.
1A. Attach the Lower Crossbeam (D) between the two Base Beams (A) and
two Mounting Plates (K) by using:
8 - (52)
Washer D13.5xD24x2.5
4 - (7)
Hex Bolt M12x1.75x80L
4 - (76)
Nylon Nut M12
Thoroughly tighten the hardware once complete.
Tip:
Install the Base Beams (A) with the Ironman logo facing outward.
Tip:
The Lower Crossbeam (D) can be mounted in three different positions.
There are additional holes towards the rear of the holes which this step
instructs for assembly. If the Lower Crossbeam (D) is interfering with your
workout in the position this step recommends, try mounting the Lower
Crossbeam (D) to one of the other two positions.
The Lower Crossbeam
must be installed in one of the available configurations.
Tip:
The Base Beams (A) have holes at the front and rear for bolting the unit to the
floor.
STEP
1
10
