Appearance upon completion of Step 5.
5. Attach the Backrest (M) to the Upper Crossbeam (C) at the by first
aligning the screw holes and hand tightening the hardware listed below into
place. Once all hardware has been inserted, fasten the hardware tightly.
2 - (19)
Hex Bolt M8x1.25x70L
1 - (3)
Hex Bolt M8x1.25x25L
3 - (57)
Spring Washer D12.3xD8.1x2.1
3 - (56)
Washer D16xD8.4x1.6
Thoroughly tighten the hardware once complete.
STEP
5
18
