4
5
5
4
5
2
5
5
55
55
5
A
B
55
Step 3.
Slide the bottom of the Pivot Arms (5) into the brackets, located at each side of the Bed Frame (4),
align to the desired hole on the arm with the peg on the bracket. Insert the peg into the hole to
lock the pivot arm in place. It is recommended that you use the bottom hole on the pivot arm
until you become more familiar with the equipment
Step 4.
Install the Pivot Arm Reinforcement Plates (55) onto the Pivot Arms (5). Mount the Bed Frame (4)
to the Rear U-Frame (2) by inserting the ends of the Pivot Arms (5) into the channels on the
plates. The slotted portion of the rollers on the end of the Pivot Arms (5) should be inserted into
the channels on the plates.
ASSEMBLY
11
Summary of Contents for 5208
Page 2: ...5208 2 072915 ...
