31
7
9
11
16
3
27
27
Step. 7
Slide the Rod (9) through the large round hole on the side of Adjustable Boom (3), and secure the Rod
(9) on the Adjustable Boom (3) with a M6x47 Hex Head Bolt (11), M6 Lock Nut (16), and two
Ø16xØ6.5x1.0 Washers (27).
Slide one Heel Holder Bracket (7) and one Rubber Heel Holder (31) onto one end of the Rod (9) until
the lock tooth is wedged into the slot in the Rod (9) as shown in small figure. Use the same
procedure to attach the other Heel Holder Bracket (7) and Rubber Heel Holder (31) onto the other end
of the Rod (9).
NOTE:
Make sure the lock teeth are wedged into the slots in the Rod (9) to lock the Heel Holder
Brackets (7) and Rubber Heel Holders (31) in place before use.
ASSEMBLY
14
(11) Hex Head Bolt M6x47
2 PCS
(27) Washer Ø16xØ6.5x1.0
4 PCS
Hardware:
Summary of Contents for 5208
Page 2: ...5208 2 072915 ...
