Clothes Sticking to the Iron
Static electricity may cause lighter fabrics to stick to the iron when it is
lifted . Iron to the edge of the fabric before lifting the iron .
Do not run the product over buttons, zippers, or other hard surfaces .
Doing so may damage the ironing surface .
Spray Starch
When using spray starch, please use iron without steam .
Please spray a section of the fabric and then iron it . Repeat as needed .
Please only use a spray starch containing a silicone additive to prevent
scorching .
Using an excessive amount of starch on one area can damage the iron’s
soleplate .
Laundry Starch
Wash the fabric with starch and dry the fabric . Then iron without steam .
If wrinkles are hard to remove, please spray with water .
When there is starch residue on the soleplate, it may be hard to iron .
After the main body and soleplate have completely cooled down, please
clean the soleplate with a damp cloth .
Using the iron with starch residue on the soleplate could stain fabrics .
CLEANING AND MAINTENANCE
Parts of the product (soleplate, base, sides of the product) will still be hot directly after use .
Make sure the product has completely cooled down before cleaning .
Always turn off the power and unplug the power plug from the electric socket when cleaning the product .
Do not immerse product in water or spray with water . Doing so may cause electric shock, injury, or product failure .
Do not use paint thinner, alcohol, benzene, alkaline detergent, or bleach, etc . when cleaning the product . Using such
substances can cause damage, malfunctions, or changes in color, shape, and quality .
Main Body
Wring out a cool or warm damp cloth (under 104°F/40°C) and wipe away dirt .
•
If the dust is hard to remove, wipe with a cloth soaked in mild neutral
detergent and then wipe off the detergent with a fully wrung cloth .
Steam Hole
If the steam holes are clogged, carefully remove dirt particles and hard water
residue with a toothpick and then wipe with a damp cloth . Run the steamer
onto a spare cloth to release some of the steam .
•
If dirt still cannot be removed, please do not try to disassemble or repair
yourself .
•
Please contact IRIS USA, Inc . Customer Service Department .
Toothpick
(non-metal)
Soleplate
Wring out a cool or warm damp cloth (under 104°F/40°C) and wipe away dirt .
•
If the starch or other residue is hard to remove, wipe with a cloth soaked
in mild neutral detergent and then wipe off the detergent with a fully
wrung cloth .
TIPS FOR IRONING
11
12
