background image

40

This equipment meets the government's requirements for 
exposure to radio waves. The guidelines are based on 
standards that were developed by independent scientific 
organizations through periodic and thorough evaluation of 
scientific studies. The standards include a substantial safety 
margin designed to assure the safety of all persons regardless 
of age or health.
The  highest  SAR  value  reported  under  this  standard  during 
product  certification  for  use  at  the  head  is  0.011W/kg  and 
when  properly  worn  on  the  body  is  0.034W/kg.  This  device 
was tested for typical body-worn operations with the back of 
the handset kept 0.5cm from the body.

Body Operation

This device was tested for typical body-support operations. To 
comply with RF exposure requirements, a minimum separation 
distance of 0.5cm must be maintained between the user's 
body and the handset, including the antenna. Third-party 
belt-clips, holsters, and similar accessories used by this 
device should not contain any metallic components. Body 
accessories that do not meet these requirements may not 
comply with RF exposure requirements and should be 
avoided. Use only the supplied or an approved antenna.

We, IRay Technology Co., Ltd., hereby declare that this 
product was tested conforming to the applicable FCC rules 
under the most accurate measurement standards possible, 
and that all the necessary steps have been taken and are in 
force to assure that production units of the same equipment 
will continue to comply with the Commissions requirements.

Summary of Contents for FINDER II FH35R























Reviews: