Legal and Regulatory Information
Wireless transmitter module frequency range:
WLAN: 2.412-2.472GHz (For EU)
Wireless transmitter module power<20dBm (only for EU)
IRay Technology Co., Ltd. thus declares that the
Finder II series complies with the directives
2014/53/EU and 2011/65/EU. The full text of the
EU declaration of conformity as well as additional
information are available at:
www.infirayoutdoor.com.
This device may be operated in all member states of the EU.
This equipment meets the government's requirements for
exposure to radio waves. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons regardless
of age or health.
The highest SAR value reported under this standard during
product certification for use at the head is 0.005W/kg and
when properly worn on the body is 0.016W/kg. This device
was tested for typical body-worn operations with the back of
the handset kept 0.5cm from the body.
Body Operation
This device was tested for typical body-support operations. To
comply with RF exposure requirements, a minimum separation
distance of 0.5cm must be maintained between the user's
body and the handset, including the antenna. Third-party
belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body
accessories that do not meet these requirements may not
comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
FCC Statement
FCC-ID: 2AYGT-26X
Labeling Requirements
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Information To User
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
Note:
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user's authority
to operate the equipment.
Note:
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
38
39
