19
6. Main Features
Any professional knowledge is not requried to set up and use your device. Recording
files are saved on the USB flash memory and USB external hard disk drive as well as FTP
server.
6.1 AUTOMATIC RECORDING
Automatic recording is the default setting and it will record all of the phone calls. Check if
[auto/manual] LED is red. If it is green, press and hold mode button for two seconds to
switch the mode to automatic mode. The recording is automatically started during
phone call and red LED is blinking. When hanging out happens, recording automatically
ends and ending process progresses during 2 or 3 seconds. When you remove USB flash
memory from ZiLog, check if the led of USB flash memory stops its blinking and then
remove it. If it is a kind of USB flash memory without any led, remove it after 3 or 5
seconds.
6.2 MANUAL RECORDING
Manual recording records only phone calls which you select to record. Check if
[auto/manual] LED is green. If it is red, press and hold mode button for two seconds to
switch the mode to manual mode. Your device starts recording by press [MODE] button
in the manual mode and [auto/manual] LED is blinking with green while recording.
When hanging out happens, recording automatically ends and ending process progresses
during 2 or 3 seconds. When you remove USB flash memory from ZiLog, check if the led
of USB flash memory stops its blinking and then remove it. If it is a kind of USB flash
memory without any led remove after 3 or 5 seconds.
6.3 FTP TRANSMISSION
If FTP transmission is set as able in 4.2.2 ZiLog configuration. Created recording file after
hanging out is sent to FTP server. If the transmission was successfully finished,
according to web setting item of INFO FILE TRANSMISSION’s able and disable, ZiLog
network information of recording file’s name.txt is sent. If FTP transmission fails,
recheck whether FTP server’s IP address, ID, and password are right or not. ZiLog
supports PASSIVE mode transmission. Receiver FTP server should be set as PASSIVE
mode. When it comes to how to set PASSIVE mode, refer to corresponding FTP server’s
setting. As tested servers, there were FilZilla, Windows Server2003 IIS, DaFTP. After FTP
