iPB4 Biometric Device Range
–
Installation & User Guide
–
Rev 07 ©2017-2018 iPulse Systems
14
An instruction and care leaflet should also be in the box. This should be read carefully as it has a lot of
valuable information about caring for your reader, and where to find software and support should you
require any.
Unpacking the box should provide you with an IntelliRelay™ which is your reader’s
connection to the
outside world. There is a wiring diagram provided for convenience on the top of the
IntelliRelay™ casing
.
You should also find an iPB4 Biometric device, which consists of two parts: the back and front casing of the
unit. At this time, they will be nestled into each other, but not connected or joined in any way. (
see
Figure 5
–
iPB4 & IntelliRelay
Finally, and if you look at the rear casing of the iPB4 biometric device, you should also see a sticker that
has some important information on it. Some, or perhaps all, of this information will be needed during the
configuration of the iPB4 reader, depending on which software solution you are using it with, and the
specific requirements of your network.
Figure 6 - iPB4 Information Sticker
It is therefore extremely important that you make a note of all of this information BEFORE installing the
unit, and save it in a safe and secure place for future use, or when requested by the network or software
engineer who is configuring the iPB4 biometric device.
Summary of Contents for iPB4
Page 1: ......
