Front Panel Controls and Connections
The TimeIPS IPS265T/IPS275T Series servers are designed to be operated in an
office or server room and should have reasonable air circulation to prevent
overheating.
IMPORTANT: The TimeIPS server provides power and reset buttons on the front
and a master power switch on the back. DO NOT use these to shut down or restart
the system unless no other method is available. Always shutdown or reboot with a
connected keyboard and monitor through the administration console, or by
accessing the system menu via a web browser. Shutting down or rebooting with the
buttons or by disconnecting power can cause data loss.
Page 8
http://support.timeips.com 316.264.1600
TimeIPS
Front USB Ports:
Connect a USB
keyboard if needed.
Front USB Ports:
Connect a USB
keyboard if needed.
Power Button:
System will
automatically power on when AC power
is applied. Pressing this button when the
system is running will cause a forced
shutdown. Use only when proper
shutdown methods cannot be used.
Power Button:
System will
automatically power on when AC power
is applied. Pressing this button when the
system is running will cause a forced
shutdown. Use only when proper
shutdown methods cannot be used.
Power Light:
On when the system is
running.
Power Light:
On when the system is
running.
Front Audio Ports:
Not connected and
not used.
Front Audio Ports:
Not connected and
not used.
Disk Light:
On when the system is
accessing data.
Disk Light:
On when the system is
accessing data.
Reset Button:
System will reboot
immediately if the reset button is
pressed. Use only when proper
shutdown or restart methods cannot be
used.
Reset Button:
System will reboot
immediately if the reset button is
pressed. Use only when proper
shutdown or restart methods cannot be
used.
