iPor t ver. FS
Ins tr uction Manual
iPort Connections and Controls
iPort Dock (
see
Figure 2):
Function Selector/Status Indicator:
Whenever an iPod is
docked into the iPort the Function Selector/Status
Indicator glows
white
and the iPort enters the Music
Stream (listening) mode. To switch the iPort to the Data
Transfer mode, press the Function Selector until the Status
Indicator turns
red
. Data can then be transferred from the
computer to the docked iPod. To switch back to the
Music Stream mode, eject the iPod from your computer by
issuing an
eject
command via your computer’s music transfer
software. (The iPort will not switch back to the listening mode
while data is being transferred from the computer to the iPod.)
Note: The iPort does not output audio or video while
in the Data Transfer mode.
Multi-Function Buttons (FS-2 – FS-5 only):
When the
Volume Control Switch (see below) is set to the
Variable
position, pressing the left button lowers the volume;
pressing the right button raises the volume. When the
Volume Control Switch is in the
Fixed
position, pressing
the left button changes the iPod stream to the previous
track; pressing the right button changes the iPod stream
to the next track.
Multi-Pin Connector:
Connects the iPort dock to the
Connection Box and to a computer, using the supplied
Double Cable.
Fixed/Variable Volume Switch (FS-2 – FS-5 only):
When the switch is towards the
front
of the iPort
(
Variable
position) the Multi-Function buttons act as Volume Control buttons. When the switch is
towards the
rear
of the iPort (
Fixed
position) the Multi-Function Buttons act as Track Skip buttons.
Note: On the FS-1 this switch acts as a brightness switch for the Status Indicator:
The front
position is
dim
; the rear position is
bright
.
6
Figure 2: iPort Dock
Connections and Controls
Function Selector /
Status Indicator
Left Multi-Function
Button
Right Multi-Function
Button
Va
r.
Fixed
Multi-Pin Connector
Fixed/Variable
Volume Switch
Underside of iPort Dock
