16
iPor t ver. FS
Ins tr uction Manual
Adjusting the iPort Dock for
Different iPod Models
The iPort Dock can accommodate the following iPod
models: iPod mini, iPod with dock connector, and iPod
photo. From the factory it is set-up for any iPod model
larger than 30GB with a dock connector.
• To adjust the iPort Dock for the iPod mini and other
iPods with a dock connector that are 30GB or smaller,
extend the iPort’s center disc forward by rotating it
counter-clockwise until you feel the disc lock-into place
(see
Figure 11
). Spring-loaded clamps at the sides of the
iPod well will hold these smaller models in place.
• When switching-back to iPod models with a dock connector that are larger than 30GB, retract the
iPort’s center disc backwards by rotating it clockwise and pushing it until you feel the disc lock-into
place (see
Figure 11
). When these larger models are docked in the iPod well the spring-loaded clamps
will rotate out of the way.
Docking and Undocking
an iPod in the iPort
Docking
After adjusting the iPort for the particular iPod
model (see above), gently slide the iPod down
into the iPort Dock as shown in
Figure 12
. Do not
force the iPod down into the well, or you may
damage the multi-pin connector in the iPort base.
Undocking
Undock the iPod only when the iPort Status
Indicator is
white
, indicating that the iPort is in the Music Stream (listening) mode. To undock the iPod
while the Status Indicator is
red
(iPort is in the Data Transfer mode), you should issue an
eject
command via the computer’s music transfer software.
For
iPod mini &
iPods with a
Dock Connector
that are 30GB
or smaller
For
iPods with a
Dock Connector
that are larger
than 30GB
Rotate
Disc
Figure 11: Adjusting the iPort
Dock for Different iPod Models
Figure 12: Docking the iPod
