IPN W9 Series, Operation Manual

Page: 13 / 22

13
< 20%
20%-40%
40%-60%
60%-80%
80%-100%
Your IPN DECT Headset allows for a second headset to be temporarily connected to the base so
that you can have a three way conference call.
NOTE: The additional headset will only remain registered to the base for the duration of the call.
After the primary headset has ended the call, the unit will return to its normal state.
Ÿ
Setup the call using the primary headset unit.
headset will be disconnected from the base and the call will be automatically placed on hold. If
you move back inside the range of the base the headset will automatically reconnect.
The four LED's (8) on the top of the headset base indicate the battery level of your headset.
3.8 Making A Conference Call
Models W970/W980/W985/W990/W995 only:
Ÿ
Once the registering has completed, the base ‘Online indicator’ LED will stop flashing and
the additional headset LED will flash.
Ÿ
Once on the call, place the second IPN DECT headset unit on the base charger.
3.7 Battery Level Indication
Ÿ
After one second, the ‘Online indicator’ LED of the new headset will turn on and the base
' Online indicator' LED will flash to indicate the headset is registering with base unit.
Ÿ
Once the registration has completed, a confirmation sound will be heard on the primary
headset.
Ÿ
Lift the additional headset from the base and it will enter talk mode.
The IPN DECT headset also allows you to make a conference call between your normal phone
and a computer. To activate this option hold down the PC/USB button on the base for four