IPN W9 Series, Operation Manual

Page: 11 / 22

11
line will be seized. Otherwise, you will also need to activate the Headset port via your
Ÿ
To end the call, replace the headset on the base or press the headset ON/OFF button.
Ÿ
After finishing your call, press the ON/OFF button to disconnect. The base ‘Online
3. Operation
Ÿ
After finishing the call, replace the headset on the base or press the ON/OFF button
flash, also a ring tone will be heard on the headset.
3.1.3 Making an outgoing call in USB/PC mode (Models W970/W980/W985/W990/W995)
to disconnect. The 'Online indicator' LED will turn off.
Ÿ
Lift the headset from the base to answer the call. If you are already wearing the
3.1.1 Making an outgoing call in Telephone mode
Ÿ
Lift the headset from the base to start a call. If you are already wearing the headset,
Ÿ
Dial the telephone number on the telephone terminal
headset press the headset’s ‘ON/OFF’ button . The base 'online indicator' LED will light.
If a handset Lifter or Electronic Hookswitch device is connected to the headset base,
3.1.2 Receive an incoming call in Telephone mode.
Ÿ
Lift the headset from the base or press the headset's ON/OFF button if you are already
your telephone terminal.
Ÿ
wearing it and the base 'On line indicator’ LED will light.
3.1 Making and Receiving Calls
telephone terminal.
Ÿ
Ensure that the 'TEL' button on top of the headset base is selected.
press the headset’s ‘ON/OFF’ button. The base 'Online Indicator' LED will light. If a
Ÿ
If there is an incoming call from the telephone line and the headset base is connected
handset Lifter or Electronic Hookswitch device is connected to the headset base, the
to a handset lifter or Electronic Hook switch device, the 'TEL' LED and 'headset' LED will
the line will be seized. Otherwise, you will also need to activate the headset port via
Ÿ
Ensure that the 'PC' button on top of the headset base is selected.
Ÿ
indicator’ LED will turn off.