background image

18

Do not open or mutilate the battery. There may be corrosive materials which can cause damage 
to eyes or skin and may be toxic if swallowed.

Do not attempt to open battery in a fire. The battery may explode. Check the local laws for 
disposal instructions.

RECYCLING: the battery used in your headset must be recycled or disposed of properly. Contact 
your local recycling centre for propel disposal of your headset.

Charge the headset according to the instructions supplied with the headset.

To avoid the risk of electric shock, explosion, fire or leakage of corrosive or toxic chemicals, 
please observe the following charging and battery warnings:

Ÿ

Use only the charger supplied by IPN Headsets to charge the product. Do not use the 
charger for any other purpose. Ensure that the voltage rating corresponds to the power 
supply you intend to use.

Ÿ

Avoid charging the battery while it is unattended.

Headset battery warnings

The headset is equipped with a replaceable battery. To reduce the risk of fire or injury to 
persons read and follow these instructions.

Charging warnings

Ÿ

Charge the headset according to the instructions supplied with the unit.

Ÿ

Plug the AC adapter or charger into an outlet that is near the equipment and will be easily 
accessible.

Ÿ

Never charge the battery where the temperature may fall below 0°C (32°F) or rise above 
40°C (104°F) – for example in an unattended motor vehicle.

Summary of Contents for W9 Series























Reviews: