IPG Interpack ET 2Plus H275, Operator'S Manual & Parts List

Page: 33 / 78

33
R00
P
REVENTIVE
M
AINTENANCE
4. Press the spring barrel against the spring
mandrel until it is ready to slide back on
the short shaft. See Figure 10-12. Move
the whole sub assembly back to its
original position.
Figure 10-12
5. Reinsert retaining rings to their grooves.
Should the 12 mm retaining ring brake
(left one on Figure 10-13), the shaft
needs to be freed to replace it. Calibrate
spring pressure with the M6 nuts as
described earlier.
Figure 10-13
Snap Rings