IPG Interpack ET 2Plus H275, Operator'S Manual & Parts List

Page: 23 / 78

23
R00
T
ROUBLESHOOTING
HSD ET 2Plus Tape Heads are fabricated with high quality components that provide trouble-
free operation for a long period of time. However, should a problem occur, we recommend
that you consult the following table. If the problem you encounter is not discussed in this table,
call Interpack Technical Support. (see page 2 of this document).
T
ROUBLE
P
OSSIBLE
C
AUSES
S
OLUTIONS
Tape does not cut cleanly. Blade needs to be replaced.
Knife spring too weak or
broken
One way clutched roller
needs adjusting
Replace blade. Refer to
preventive maintenance
section for details
Replace knife spring. Refer to
preventive maintenance
section for details
Slightly increase the tension
on the one way clutched roller
Tape Leg
UUU
in the tape head
UUU
folds up on itself
Strong air circulation (fan) is
in the vicinity
Spring loaded tape leg
stiffener is out of position
Redirect airflow away from the
tape head
Gently bend forward to
provide a longitudinal crease
in the tape leg
Back tape leg does not fit
tight on the box. (ripple
effect)
Main spring is not strong
enough
Tape applying tension is too
great
Change for the stronger main
spring.(Part no. UPH3817)
Re-set tension on the one way
clutched roller