IPG Interpack ET 2Plus H275, Operator'S Manual & Parts List

Page: 20 / 78

20
R00
S
ET
-U
P
P
ROCEDURES
UUU
Tape Leg Length Adjustment
For optimum performance, the tape leg length has been factory set at 2 inches (50 mm).
However, the tape leg length can be modified.
Front Tape Leg
To adjust the tape leg length on the
leading end of the box, refer to
Figure 7-12 of the clutch assembly.
Facing the rear main frame, loosen
the two (2) Flat Head Cap Screws
using a 3 & 4 mm hexagonal key.
Rotate the clutch assembly to bring
the lowers screw towards the minus
(-) sign stamped on the rear plate for
a shorter tape leg. Conversely, bring
the bottom screw towards the plus
(+) sign for a longer tape leg.
Re-tighten both Flat Head Cap
Screws.
Figure 7-10
Rear Tape Leg
To adjust the tape leg length on the trailing
end of the box, both chrome knife arm
extension brackets must be re-positioned.
Unscrew the three (3) Flat Head Cap
Screws on each knife arm extension using
an 2.5 mm hexagonal key.
For a
UUU
Shorter Tape Leg
UUU
, bring the knife
arms towards the
UUU
front
UUU
of the tape head.
Conversely, for a
UUU
Longer Tape Leg
UUU
, bring
the knife arms towards the
UUU
rear
UUU
of the tape
head. Both Knife Arm Extensions have to
be set for the same position.
Replace the three (3) screws on each
knife arm extension and tighten.
Figure 7-11
Front
Rear