Operating Manual
Page 2
Operating manual LC 340.01-A.3.5/6
Current revision status: Apr 4, 2019
Notices
© IPG Photonics Corporation. All rights reserved. You may not copy, reproduce, transmit, store
in a retrieval system or adapt this publication, in any form, in any media or by any means,
without the prior written permission of IPG Photonics Corporation (IPG), except as allowed
under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary
notices which were contained on the original version.
All information contained in this document is subject to change and revision without notice. IPG
believes that the information provided is accurate and reliable, however IPG makes no warranty
or representation, express or implied regarding this document, including without limitation the
implied warranties of merchantability or fitness for a particular purpose. Further, IPG does not
assume responsibility for use of the information contained in this document or for any
infringement of patents or other rights of third parties that may result from its use. IPG shall not
be liable for errors contained in this document or for incidental, consequential, indirect or
special damages in connection with the furnishing, performance or use of this material.
IPG grants no license, directly or indirectly under, any patent or other intellectual property rights
from use of the information provided herein.
IPG, IPG Photonics and the IPG Logo are registered trademarks of IPG Photonics Corporation.
We have identified words that we consider as trademarks. Neither the presence nor absence of
trademark identifications affects the legal status of any trademarks.
Preface
Please take time to read and understand this Service Manual and familiarize yourself with the
operating and maintenance instructions that we have compiled for you before you use the
product. We recommend that the operator read Chapter 2, Safety Instructions, prior to operating
the product.
This Service Manual should stay with the product to provide you and all future users and owners
of the product with important operating, safety and other information.
US Export Control Compliance
IPG’s policy and business code is to comply strictly with the U .S. export control laws.
Export and re-export of lasers manufactured by IPG are subject to the US Export Administration
Regulations administered by the Department of Commerce, Bureau of Industry and Security.
The applicable restrictions vary depending on the specific product involved, intended
application, the product destination and the intended user. In some cases, an individual
validated export license is required from the U S Department of Commerce prior to resale or re-
export of certain products. Please contact IPG, if you are uncertain about the obligations
imposed by US law.