ipDatatel BAT-CDMA-WIFI, Installation Manual

Page: 27 / 32

DSC (Digital Security Control)
Panel Rev
Digital
Dialer
Full
Interactive
GSM
Emulator
PC5010 ALL YES YES
PC1616 4.13+ YES YES YES
PC1832 4.13+ YES YES YES
PC1864 4.13+ YES YES YES
Alexor ALL YES
GE NetworX
Panel Rev
Digital
Dialer
Full
Interactive
GSM
Emulator
NX-4V2 V2+ YES
NX-6V2 V2+ YES
NX-8V2 V2+ YES
Note: Any alarm panel of any brand not on the supported lists herein
should function properly as long as the control transmits Contact ID
format through Tip & Ring. If the panel has the ability to use a Dedicated
Open Zone that acts as a key switch, you can Arm/Disarm from the
website or mobile device.
For non-supported panels: Bridge 12 VDC to “Y/TX” Terminal with
any type of radial resistor with a value of 2.7k to 10k ohms as a weak
“pull up”.
Note: Some features of the Virtual Keypad may not function on all
panels; however, the Arm / Disarm System is fully functional on all
panels.
Dual-Path Alarm Communicator - Installation Guide ............................................... Page 27