ipDatatel BAT-CDMA-WIFI, Installation Manual

Page: 17 / 32

Programming ONLY when using PC-Link to send Signals
(Used when Tip/Ring cannot utilized):
if GSM is used, it must be in dialer capture mode.
Sec
BAT as Sole
Communi-
cator BAT as
Failover
w/ Add’l
BAT as
Dual
Code Summarization
351 Enable
Option 1 Enable
Option
1, 5 Enable
Option 1,
2, 5 Options to turn on/off alarm/
restore for telephone 1 (option 1),
telephone 2 (option 2), and alternate
communications (option 5).
359 Enable
Option 1 Enable
Option
1, 5 Enable
Option 1,
2, 5 Options to turn on/off tamper/
restore for telephone 1 (option 1),
telephone 2 (option 2), and alternate
communications (option 5).
367 Enable
Option 1 Enable
Option
1, 5 Enable
Option 1,
2, 5 Options to turn on/off opening/
closing for telephone 1 (option 1),
telephone 2 (option 2), and alternate
communications (option 5).
375 Enable
Option 1 Enable
Option
1, 5 Enable
Option 1,
2, 5 Options to turn on/off maintenance
for telephone 1 (option 1), telephone
2 (option 2), and alternate
communications (option 5).
376 Enable
Option 1 Enable
Option
1, 5 Enable
Option 1,
2, 5 Options to turn on/off testing for
telephone 1 (option 1), telephone
2 (option 2), and alternate
communications (option 5).
380 Enable
Option 1 Enable
Option
1, 5 Enable
Option
1, 5 Option 1 turns on/off communications.
Option 5 turns on/off 3rd phone number.
381 Disable
Option 3,
Enable
Option 5 Disable
Option 3,
Enable
Option
5, 6 Disable
Option 3,
Enable
Option
5, 6 Option 3 turns on/off code
reporting. Options 5 & 6 turns on/off
communication with phone lines 1/3 & 2
respectively.
382 Enable
Option 5 Enable
Option 5 Enable
Option 5 Option 5 enables/disables T-Link/PC-
Link.
389 Set ‘003’
Seconds Set ‘003’
Seconds Set ‘003’
Seconds The time it will take to periodically check
for faults on the T-Link/PC-Link.
Dual-Path Alarm Communicator - Installation Guide ............................................... Page 17