background image

Limited Warranty Information 

LIMITED WARRANTY

ipDatatel, LLC (hereinafter referred to as “Seller”), Located at 13110 
Southwest Freeway, Sugar Land Texas 77478, warrants its “Product” 
to be in conformance with the product specification, and to be free from 
defects in materials and workmanship under normal use and service 
for a period of twelve (12) months from the date of original purchase. 
Seller’s sole obligation shall be limited to repairing or replacing, at its 
option, free of charge for materials or labor, any product which is proved 
not to be within Seller’s specifications of the Product, or proves defective 
in materials or workmanship under normal use and service. 

Any device manufactured that includes the Product mounted in a plastic 
enclosure must remain in the plastic enclosure for installation and 
regular use. At no point should the Product be removed and/or mounted 
without the plastic enclosure, and any non-compliance shall be deemed 
an alteration and void the Product Limited Warranty.  

LIMITED LIABILITY

Seller shall have no liability or obligation under this Limited Warranty or 
otherwise for merchantability or fitness for any particular use; nor shall 
it extend its Limited Warranty, if the product is altered, or improperly 
installed, repaired, or serviced. There are no warranties, express or 
implied, that extend beyond those contained within this document. In no 
case shall Seller be liable to person or entity for any consequential, or 
any other basis of law or liability whatsoever, whether or not such loss 
or damage is caused by Seller’s own negligence or fault.  

Seller does not represent that the Product may not be compromised 
or circumvented, or that it will provide the service intended; or that the 
Product will prevent any personal injury or property loss by burglary, 
robbery, or otherwise; or that the Product in all cases will provide 
adequate warning or detection. 

Customer understands that a properly installed and maintained alarm 
system may only reduce the risk of burglary, robbery, or other such 
events occurring without providing an alarm, but is not insurance or 
guarantee that such will not occur or that there will be no personal injury 
or property loss as a result. 

Dual-Path Alarm Communicator - Installation Guide ...............................................

Page 28

Summary of Contents for BAT-CDMA-WIFI

































Reviews: