IPC B02200769 User Manual Download Page 148

Page: 148 / 186

1. Tap the

Batch Settings Mode

icon.

Figure 66: Speakers: Groups

Batch Settings Mode

icon

Groups

button

Groups the speaker channel is assigned to

Currently selected speaker group

2. Tap the

Groups

button.

3. At the bottom of the screen, tap the speaker group to which you are assigning the speaker channels.

4. Tap one or more speaker channels to add them to the group.

The speaker group number is displayed within the speaker channel.

5. Tap the

Batch Settings Mode

icon to leave edit mode.

For information on setting the latch behavior for the speaker groups, refer to

Set the latch type for

speaker groups

on page 149.

10.5.2

Remove a speaker channel from a speaker group

You can remove a speaker channel from a speaker group.

1. Tap the

Batch Settings Mode

icon.

148

10.5: Speaker groups

August 26, 2019

IPC Proprietary

Summary of Contents for B02200769


























































































































































































Search results

Summary of Contents for B02200769

Reviews:

Related manuals for B02200769

Brands by name

Popular brands

IPC B02200769, User Manual

Search results

Summary of Contents for B02200769

Reviews:

Related manuals for B02200769

Brands by name

Popular brands