IPC B02200769, User Manual

Page: 149 / 186

Figure 67: Speakers: Groups
1
Batch Settings Mode
icon
2
Groups
button
3 Groups the speaker channel is assigned to
4 Currently selected speaker group
2. Tap the
Groups
button.
3. At the bottom of the screen, tap the speaker group from which you are removing the speaker channel.
4. Tap the speaker channel to remove it from the group.
If you are removing more than one speaker channel from the group, tap each of the speaker channels.
The speaker group number is removed from the speaker channel.
5. Tap the
Batch Settings Mode
icon to exit edit mode.
10.5.3 Set the latch type for speaker groups
You can set the latch behavior for speaker groups to Push-to-Talk or Push-to-Latch in the Settings
application.
1. Tap the
User Badge
in the footer.
2. Tap
Settings
.
3. Tap
Speakers
.
4. In the
Speaker Groups
section, tap
Push to Talk
or
Push to Latch/Unlatch
for each speaker group.
5. Tap
Close
to exit Settings.
10.5: Speaker groups 149
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide