IPC B02200769, User Manual

Page: 60 / 186

Note
If you change the button background color while the line associated with the button is ringing, the color
change is not dynamically updated in the Call Notification popup or Call Notification area; however, the
change is visible within the Activity Monitor. Button priority and status color changes are dynamic.
All buttons idle
In this example, four of the eleven assigned buttons have a custom background color assigned. The other
buttons are displaying the default color (gray). Because all of the lines are currently idle, the background
color fills the entire button.
Figure 33: Idle lines
Line status
In this example, the buttons with lines 1002-1 and 1004-1 assigned are in the U-Busy state, so the lower
two-thirds of the buttons display the color assigned to the U-Busy line status (blue) and the top one third
displays the button background color. Buttons with lines 1001-1, 1003-1, 1005-1, and 1006-1 assigned
are idle. This button display also applies to calls in the I-Busy, I-Hold, and U-Hold states, with each line
status displaying the color assigned to it in the lower two-thirds of the button.
Figure 34: Line status
Priority
In this example, the button with line 1002-1 assigned is ringing with an incoming high priority call, so
the lower two-thirds of the button displays the color assigned to high priority calls (red). The button with
line 1005-1 assigned is ringing with a low priority call, so the lower two thirds displays the color
assigned to low priority calls (orange). The tops of the buttons display the button background color.
Buttons with lines 1001-1 and 1003-1 are in the U-Busy state. All other buttons are in the idle state.
Figure 35: Priority
Line status and call pending timer bar
In this example, the buttons with lines 1006-1 and 1010-1 are in the I-Busy state, so the color assigned
to the I-Busy line status (dark green) is displayed in the lower two-thirds of the buttons and the button
background colors are displayed in the top one third of the buttons. These buttons are assigned the
60 4.10: Batch settings mode
August 26, 2019 IPC Proprietary