IPC Eagle Ultra Pure Systems Hydro Cart Compact, Operation Manual

Page: 5 / 18

Filter Installation
Carbon Sediment cartridge Installation :
•
The 5 micron carbon/sediment filter cartridge is
the first filter the feed water goes through. Install it in
the housing on the right side, next to the water
supply hose inlet fitting .
1. Slide the small filter housing wrench up from under
the bottom of the white housing and turn CCW to
loosen. Remove the tool and spin housing
completely off.
2. Lubricate o-ring on housing with Magic Lube
o- ring lubricant.
3. Remove plastic wrapping on new filter cartridge.
Position center hole on shouldered ring on bottom
of housing.
4. Screw housing into base and tighten with small
filter housing wrench. Do not overtighten.
DI resin cartridge Installation:
1. Slide the small filter housing wrench up from under the bottom of the white housing and
turn CCW to loosen. Remove tool and spin housing completely off.
2. Lubricate o-ring on housing with Magic Lube o-ring lubricant.
3. Remove cartridge from the sealed bag and place into housing with seal washer in the
up position and locate the bottom hole on shouldered ring inside the bottom of the
housing.
4. Screw housing into base and tighten with filter housing wrench. Do not overtighten.
The DI filter cartridge is the final filter and removes the rest of the impurity's after the RO.
Install it in the housing on the left side, next to the pure water discharge fitting.
p. 5