nano3G AP Installation Manual
Configuration File Preparation
N3G_INST_300 v8.1 for N3G_2.0.5 © ip.access Limited 2011
Page 30
4.3.2
Example AP-Specific Configuration File
The following example file shows the attributes that are unique for each AP. This is a
manually created example, rather than being based on a file exported from an existing AP.
Object=apNano8_020
#
# Network Listen Control Package
lacRacCandidateList=({15912,(99)})
rfParamsCandidateList=({1062,437,1})
rfScanControl={"0200",1440,240,true}
#
# Location Package
lcsLongitude=-2540
lcsLatitude=695
lcsUncertainty=15
#
# end of file
neighbourListPopulation
This determines how the live neighbour list is populated. The
recommended setting is STATIC_ONLY, which only uses
neighbours entered in the static neighbour lists, as determined
by network planning.
diagnosticReporting for S4 APs
or diagnosticReporting_001 for
E8 APs
Set the URL of the AP Management System diagnostics service.
Replace oam.server with the IP address or FQDN of the server.
reportingUrl
Set the URL of the AP Management System measurement
reporting service. Replace oam.server with the IP address or
FQDN of the server.
localTimeZone
Set the timezone, in POSIX format, where the APs are located.
This assumes that all APs on the same AC are in the same
timezone, which is the most probable scenario. If APs are spread
across several timezones, this can be an AP-specific setting.
Parameter
Description
Parameter
Description
Object
Object type for APs, must be apNano_002 or apNano8_001
lacRacCandidateList
LAC and RAC for the AP.
rfParamsCandidateList
Set the UARFCN, Scrambling Code and Cell ID to be used by the
AP.
