nano3G AP Installation Manual
nano3G AP and PSU Regulatory Information
N3G_INST_300 v8.1 for N3G_2.0.5 © ip.access Limited 2011
Page 74
9.3
Regulatory Statements for nano3G S8 AP
9.3.1
US FCC Compliance
• FCC CFR47 Part 15B: Variants 237B, BA, C, CA
• FCC CFR47 Parts 22, 24: Variants 237B, BA
• FCC CFR47 Part 27: Variants 237C, CA
Note:
Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment.
The FCC IDs for nano3G S8 AP model variants are:
Note:
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
9.3.2
EU Regulatory Compliance
Models nano3G 237A and 237AA conform to the following regulatory standards:
"Hereby, ip.access Ltd, declares that this nano3G S4 AP is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC."
Model
FCC ID
nano3G 237B
QGGIPA237B
nano3G 237BA
QGGIPA237BA
nano3G 237C
QGGIPA237C
nano3G 237CA
QGGIPA237CA
WARNING
This is a class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Health (Art 3.1(a)):
EN50385: 2002
Safety (Art 3.1(a)):
EN60950-1: 2006
EMC (Art 3.1(b)):
EN 301 489-23 V1.3.1, EN 302 489-1 V1.8.1
Spectrum (Art 3.2):
EN 301 908-1 V4.2.1, EN 301 908-3 V3.2.1
This product is intended for use in all
Member States of the European Union.
