manualshive.com logo in svg

IOtech WaveBook 512, User Manual

Share
Download
IOtech WaveBook 512 User Manual Download Page 17

2-2     System Setup and Power Options

03-06-02

WaveBook/512 and WaveBook/512H

Connecting the Communication Cable

WaveBook communicates with a notebook or desktop PC through the computer’s parallel port.  Use of an
Enhanced Parallel Port (EPP) or an Extended Capabilities Port (ECP) is recommended.

Two card options are available for use with PCs that do not have Enhanced Parallel Ports.  These are:

•

 

WBK20A PCMCIA/EPP interface-card, to be used in conjunction with
a notebook’s PC-Card port.

•

 

WBK21 ISA/EPP interface-card, for use with a desktop PC.

A 2-foot CA-35-2, or a 6-foot CA-35-6 communication cable is used to connect the WaveBook to the host
PC.  The connection is made via a 25-pin connector labeled “TO COMPUTER,” and located on
WaveBook’s rear panel.  The other end of the cable connects the computer’s PC Parallel Port.

To ensure EPP speeds are properly handled, it is important that WaveBook systems make
use of a 1284-compliant cable.  Standard parallel cables will not work properly, primarily
due to a lack of shielding.  Note that cables CA-35-2 and CA-35-6 are
1284-compliant.  These are 2 and 6 foot cables, respectively.

Connecting the Communication Cable (CA-35-2)

Reference Notes:

➣

 

For detailed information regarding the optional WBK20A PCMCIA/EPP interface-card,
refer to the 

WBK20A

 User’s Guide (p/n 274-0901).  A copy of the guide is shipped with

the product.  A PDF version of the guide can be accessed from our web site, or from a
link in the electronic version of the WBK Option Cards and Modules User’s Guide
 (p/n 489-0902).

➣

 

For information regarding the optional WBK21 ISA/EPP interface-card, refer to the
WBK21 installation guide [that is shipped with the card].  The 

WBK21 

option is also

discussed in the WBK Option Cards and Modules User’s Guide (p/n 489-0902).

➣

 

Note that PDF versions of documentation are loaded onto your hard drive, as a part of
product support, during software installation.  The default location is the Programs file
directory, which can be accessed from the Windows Desktop.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for WaveBook 512















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands