TIGER XTS Instrument User Manual V1.0
P
ion
eering Gas Sensing Technology.
Page 18 of 74
ionscience.com
Status Icons
Health and Safety
: This will flash in an alarm condition and (if the instrument has the
Health and Safety
) when health and safety readings are being collected.
: This is displayed when peak hold is on.
Memory Status
: Only displayed if the instrument has the
. Four
sections within the border fill as the data log memory is filled.
Empty border = 100% memory available through to full, where all segments are present.
The icon fills as data log memory is filled. It will flash when multi-logging is activated.
USB
: This is displayed when the instrument is connected to a PC.
Battery Status
: A standard
When the battery is nearly discharged, the final segment flashes for one minute before
the instrument shuts down.
: This is displayed when the backlight is on.
: The top icon is displayed if all three alarm sounders are off and the volume is set
to 0%.
Otherwise, zero to three sound projection lines are displayed to indicate the volume
level (there are four sound levels; no line is displayed for the quietest).
Alarm Bell:
When a 'Low alarm' is triggered, the bell symbol and one curved line on
either side of the bell symbol will flash.
When a 'High alarm' is triggered the bell symbol and two curved lines on either side of
the bell symbol will flash.
Flashlight/Torch
: This is displayed when the flashlight/torch is turned on by pressing the
A
and
B
keys simultaneously.
: This is displayed when the configuration of the TIGER XTS has been locked in
TigerPC. Soft key
B
will be disabled.
