TIGER XTS Instrument User Manual V1.0
P
ion
eering Gas Sensing Technology.
Page 29 of 74
ionscience.com
6.
Using the Tiger PC Software and Downloading Data
The Tiger PC software enables you to fully configure the instrument, view and edit gas tables, and
view logged data, including health and safety readings.
PC Requirements
Tiger PC Software must be used in conjunction with a PC or laptop using Windows 10.
Installation of Tiger PC Software
Download the Tiger PC software from the
Run setup.exe to install the software.
Alternatively, the Tiger PC software can be purchased on a memory stick.
Follow the prompts until the installation is complete. Should you have difficulty, please contact your
local distributor, or contact ION Science directly.
Connecting a TIGER XTS to a PC
The TIGER XTS must be functionally checked prior to entering a hazardous area
after every occasion when a connection has been made to the USB port. The
instrument must complete its start-up routine and display legible readings. If the
LCD display fails to show an intelligible and uncorrupted display the instrument
must not enter a hazardous area.
Connect your TIGER XTS to the PC. The (type B) USB port of the TIGER XTS is located at the back of
the instrument, above the charging connectors.
While the TIGER XTS is connected, unless it is in
, the instrument will go into Sleep Mode
. The instrument will “awaken”
when it is disconnected.
