2x2 Indoor & Outdoor Access Points
Revision: A0-00
32
CONFIDENTIAL
7
Connect to the Thin Mode Access Point and Log In
You can connect to the access point’s web management interface to view or change its LAN and wireless access
settings. Refer the procedure mention in “Connect to the Indoor Access Point” and “Connect to the Outdoor Access
Point” section and connect to a thin mode access point.
7.1
Login through GUI
This is the 1
st
screen of AP GUI. It provides access to the users with valid login credentials only. The login
credentials will determine the access rights of the user.
A basic overview of the same is shown below:
Figure 12: Basic overview of login screen
Follow the steps given below to login through GUI:
Table 4: List of actions to login through GUI
Callout
Name
Description
1.
Web browser
Open a web browser and enter the “IP address of the AP” in
the address bar. 192.168.1.1 is the default IP address
2.
User name
Enter the valid “User ID”
3.
Password
Enter the valid “Password”
Click on “Login”, a successful/authenticated login will take the user to Status Overview screen.