2x2 Indoor & Outdoor Access Points
Revision: A0-00
20
CONFIDENTIAL
4
Hardware Setup
4.1
System Requirements
Before installing the access point, make sure that your system includes the following:
1.
10/100/1000 Mbps local area network device such as a hub or switch.
2.
The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the package, or one
like it.
3.
We can power up the device through PoE adaptor which should be 803at/af compliant. A 100–240 V, 50–60
Hz AC power source.
4.
A web browser to configure the devices.
5.
At least 802.11b/g-compliant devices.