Iomega StorCenter px12-400r, User Manual

Page: 163 / 179

Hardware Management
151
Rear Panel
.
1. AC Power Connectors — Connect both AC power connectors to an Uninterruptable Power Supply
(UPS) to provide redundant power for your px12-400r. The AC power supply will automatically switch
to the correct voltage for your region.
2. Power Supply — The px12-400r has redundant hot-swappable power supplies. If one power supply
fails, the other power supply will immediately take over. For maximum time-up, a failed power
supply can be replaced while the px12-400r is running.
3. System ID LED — Flashes blue when the Blink Lights feature is enabled in the Iomega StorCenter
px12-400r Console. This light is used to identify a specific px12-400r in installations with multiple
devices.
4. Reset Button — Press the Reset button to reset security and network settings. This allows you to
regain access if network settings are incorrect or you’ve forgotten your password. Note: The Reset
button does not initiate a full factory reset. To perform a full factory reset, select Factory Reset
from the System page in the Iomega StorCenter px12-400r Console
5. USB 2.0 connectors — Supports devices such as USB storage devices and printers.
6. Gigabit Ethernet Ports — High-speed Ethernet connectors that automatically detect your network
speed (10/100/1000Base-T).
7. VGA output connector — Connect a monitor for video surveillance applications.
Default Settings:

IP Address: If not DHCP server is found on your network, the StorCenter will get a self-
assigned IP address in the 169.254.x.x range.

Device Name: The default name for your Iomega StorCenter px12-400r is px12-400r-XXXXXX
(where XXXXXX is a unique string of letters and numbers).

Default Shares: Backups, Documents
.