Iomega HDD External Hard Drive User's Manual
Connect the Iomega
®
HDD External Hard Drive to FireWire
NOTE:
Read the
FireWire Guidelines
and
Troubleshooting
section in this User's Manual for important information to
prevent potential system or device damage.
The FireWire adapter cable can be connected to the computer while the computer is running.
6-pin FireWire Port
Connect the Iomega HDD External Hard Drive to a 6-pin FireWire Connection
1. Start your computer, wait for the operating system to load completely, then insert the installation CD to install the
driver. If the installation does not start automatically, double click on the CD icon. The neccessary drivers will
automatically be installed. Install the software after you have connected the drive to your computer.
2. Connect the FireWire adapter cable to the drive.
3. Connect the FireWire adapter cable to a FireWire port on the computer.
Look for "1394," or the FireWire logo, which usually identifies the 6-pin FireWire connection. If you need help
finding the FireWire connection on your computer, refer to the computer or FireWire adapter card documentation.
http://www.iomega.com/support/manuals/hdde40u/inst_drive_fw.html (1 of 3)3/21/2005 12:20:42 PM
