Iomega HDD External Hard Drive User's Manual
NOTE:
PC users must stop the Iomega HDD External Hard Drive first. See the
Device Stop Utility
in the
Using
Your Drive
section. Mac users should select the drive icon and use the
Put Away
command or drag the icon onto
the trash icon.
●
You can optimize the Iomega HDD External Hard Drive's performance by disconnecting other USB devices when
using the drive. The performance of all USB devices decreases as additional USB devices are connected.
●
You can ensure maximum performance by connecting your Iomega HDD External Hard Drive directly to your
computer, instead of to a hub.
●
You can avoid some system lockups by waiting at least 30 seconds after connecting or disconnecting any USB
device to allow the system to re-enumerate the USB bus. Do not connect, disconnect, or use any other USB device
during this time.
|
top of page
|
Do not...
●
Do not connect or disconnect
any
USB device while the Iomega HDD External Hard Drive is transferring
information.
Data loss will result!
●
Do not use any USB cable with your Iomega HDD External Hard Drive other than the cable that came with it.
●
Never use USB extension cables with your Iomega HDD External Hard Drive.
Data loss might result.
●
Do not connect more than two Iomega HDD External Hard Drives with USB connections to a single computer.
|
top
|
home
|
Copyright © 2002
Iomega Corporation
All rights reserved
http://www.iomega.com/support/manuals/hdde40u/guide_usb.html (2 of 2)3/21/2005 12:20:35 PM
