Ioline FJ Printer, Service Manual

Page: 13 / 116

Safety &
Cautions
xiii
The Ioline FJ printer and StudioJet have many fast moving compo-
nents. Please read and follow these safety guidelines before begin-
ning operation of the printer:
 Do not try to repair the machine without factory authoriza-
tion. Only qualified service personnel should attempt any
disassembly or access to internal components. If external
mechanical adjustments are necessary, turn off the printer and
disconnect it from all power sources (both the computer and
the wall outlet).

Be careful with hair, jewelry, or loose clothing near the printer.
They can become caught in the mechanical parts.

Never attempt to move the carriage by hand when the power is
on. Always use the Arrow keys to move the carriage.
To park the carriage
safely in the Service
Station and protect
the print cartridges,
press the Clean but-
ton.

Keep hands away
from the carriage
when the printer is in
operation. The car-
riage will automati-
cally move to touch
the left end plate then
back to the right end
(the Service Station
position) when the power is turned on.

Never insert hands or other objects into the Service Station
area on the right side of the printer. The carriage occasionally
enters this area without warning and could collide with an
obstruction, potentially causing and injury.
 Be careful when moving or lifting the printer. Moving the print-
er requires at least 2 people. To avoid injury to your fingers, do
not lift the printer by the end plates. Hold the bottom surfaces
of the end covers to lift or move it. See Figure 1 .

Keep fingers away from the drive shaft when the printer is in
operation. Serious injury could result.
Figure 1. Hold the bottom sur-
faces of the end covers to avoid injury to your
fi ngers.
To improve readability, the
StudioJet is mentioned in this
manual only when necessary to
clarify differences in service or
maintenance procedures vis à vis
the FJ Printer. Unless otherwise
noted, instructions pertaining to
the FJ Printer are identical for the
StudioJet.
Note
 