19
Port ID Numbering
Each KVM port section on the GCS1953 switch is assigned a port number (1 to 4). The port
numbers are marked (CPU 1, CPU 2, and CPU 3) on the rear panel of the switch (see page
11 for details).
The Port ID of a computer is derived from the KVM port number it is connected to. For
example, a computer connected to KVM port 2 has a Port ID of 2.
The Port ID is used to specify which computer gets the KVM, USB peripheral, and audio
focus with the Hotkey port selection method (see page 20 for details).
Alternative Manual Port Selection Settings
When Hotkey Setting Mode has been activated, pressing [S] will invoke the alternative front
panel pushbutton manual port selection functions, as explained below:
• Press a port selection pushbutton once to bring only the KVM focus to the computer
attached to its corresponding port.
• Press and hold a port selection pushbutton for more than 2 seconds to bring the
KVM, audio and USB focus to the computer attached to its corresponding port.
• Press a port selection pushbutton twice to bring the audio focus to the computer
attached to its corresponding port.
• Press and hold port selection pushbuttons 1 and 3 for more than 2 seconds to start
Auto Scan Mode, see page 21 for details.