26
HSM Summary Table
After invoking HSM (see page 22), key in one of the following keys to perform the
corresponding function:
Key
Function
[F1]
Sets the keyboard and mouse to SPC mode so that it can work under
special operating systems as a standard (104 key) keyboard and mouse.
[F2]
Enables Mac keyboard emulation.
[F3]
Enables Sun keyboard emulation.
[F4]
Print the switch’s current settings via a text editor or word processor.
[F5]
Performs a USB keyboard and mouse reset.
[F6] [n][n]
[Enter]
Sets the keyboard language layout. Where nn is a two digit number that
represents the keyboard language code (US English: 33, French: 08,
German: 09).
[F10]
Enables Windows keyboard emulation.
[B]
Enables/disables the buzzer.
[E]
Turns the Power-on-Detection function on/off.
[H]
Toggles between the default and alternate HSM invocation keys.
[K] [Enter]
Enables/disables N-key rollover keyboard supporting function.
[M]
Enables/disables mouse emulation.
[N]
Enables/disables keyboard emulation.
[Q] [n]
[Enter]
Enables/disables specific PC port monitor re-detection function. The n
stands for the computer’s Port ID number (1, 2, or 3)
[R] [Enter]
Resets the Hotkey settings to their default status.
[S]
Toggles between the default and alternate manual port selection
pushbutton settings.
[T]
Toggles between the default and alternate Port Switching keys.
[u] [p] [g] [r]
[a] [d] [e]
[Enter]
Invokes Firmware Upgrade Mode.
[W]
Enables/disables Mouse Port Switching. When enabled, click the mouse
wheel twice to switch ports. Mouse emulation must be enabled.
[X] [Enter]
Enables/disables Hotkey Port Switching.
[Esc] or
[Spacebar]
Quits setting mode.
