21
[Scroll Lock] [Scroll
Lock] [n] [K] [U]
[Enter]
Brings the
KVM
and
USB hub
focus to the computer attached to the
specified port. The audio focus remains where it is.
[Scroll Lock] [Scroll
Lock] [n] [K] [S]
[Enter]
Brings the
KVM
and
audio
focus to the computer attached to the
specified port. The USB hub focus remains where it is.
[Scroll Lock] [Scroll
Lock] [n] [U] [S]
[Enter]
Brings the
USB hub
and
audio
focus to the computer attached to
the specified port. The KVM focus remains where it is.
[Scroll Lock] [Scroll
Lock] [n] [K] [S] [U]
[Enter]
Brings the
KVM
,
USB hub
and
audio
focus to the computer
attached to the specified port.
Note:
This is the same action as [Scroll Lock] [Scroll Lock] [n]
[Enter]
Note:
The
n
stands for the computer’s Port ID number (1, 2, or 3). See Port ID Numbering,
page 19 for details. Replace the
n
with the appropriate Port ID when entering Hotkey
combinations.
Auto Scanning
The GCS1953’s Auto Scan feature automatically cycles the KVM focus through the
computer ports at regular intervals. This allows you to monitor the computer activity without
having to take the trouble of switching from port to port manually. See the table below for
details.
Hotkey
Action
[Scroll Lock] [Scroll
Lock] [A] [Enter]
Invokes Auto Scan. The KVM focus cycles from port to port at
5
second intervals
. Five second intervals is the Default setting.
[Scroll Lock] [Scroll
Lock] [A] [n] [Enter]
The KVM focus cycles from port to port at n second intervals.
Note:
• The
n
stands for the number of seconds that the GCS1953 should dwell on a port
before moving on to the next. Replace the
n
with a number between 1 and 99 when
entering this Hotkey combination.
•
While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are
suspended – only Auto Scan Mode compliant keystrokes and mouse clicks can be
input. You must exit Auto Scan Mode in order to regain normal control of the console.
• Although the video focus switches from port to port, the audio and USB focus do not
switch. They stay at the port they were on when Auto Scanning started
• To exit Auto Scan Mode, press the
[Esc]
key, or the
[Spacebar]
.
