IBM Host Configuration
9
Applying a New License File
After applying the license file, additional print sessions will be activated.
To apply a license file, follow these simple steps.
1. Copy the attached license file into a temporary directory.
2. Start the Configuration Utility and open the configuration of the gateway box.
3. Ensure all sessions are not actively printing jobs before continuing.
C
AUTION
:
P
RINT DATA COULD BE LOST IF THE SESSIONS ARE NOT IDLE
.
A
S AN ALTERNATE
,
STOPPING
ALL SESSIONS WILL ENSURE THAT NO DATA WILL BE LOST
.
4. From the Printer Sessions window, click New License.
5. Navigate to the license file in its temporary directory.
6. Click Open. The license will be copied into the gateway box.
7. Click Close and you will be prompted to Reset the box.
8. After the Reset, open the configuration and the available sessions will be shown on the list.
If you encounter problems, or have questions, please refer to the following resources:
I-
O’s Knowledge Base at
http://www.iocorp.com/help
The User’s Guides and Reference Manuals found at
ftp://ftp.iocorp.com/Host_Print/adaptio/
or Manuals on the I-O Configuration Utility CD.
N
OTE
:
T
HESE MANUALS ARE FOR THE
A
DAPTIO
S
OFTWARE
S
ERVER AND SOME REFERENCES MAY NOT
PERTAIN TO THE
ADAPTIO
/G
ATEWAY
.
E-mail I-
O’s Technical Support Group at [email protected]
Contact I-
O’s Technical Support Group by voice at 801-973-6767.
Operation
This chapter covers the process of adding, editing and deleting sessions, diagnostic processes, etc.
N
OTE
:
T
HE INSTRUCTIONS PRESENTED HEREIN ARE FOR
W
INDOWS
XP
P
RO
.
S
LIGHT VARIATIONS
OCCUR DUE TO THE DIFFERENCES BETWEEN THE VARIOUS
W
INDOWS OPERATING SYSTEM VERSIONS
.
TIP:
D
ETAILED INSTRUCTIONS FOR SOME OF THE PROCESSES DESCRIBED HERE MAY BE FOUND IN TWO
COMPANION DOCUMENTS
,
THE
SCS
R
EFERENCE
M
ANUAL
OR THE
C
ONFIGURATION
U
TILITY
H
ELP
.
T
HEY CAN BE VIEWED FROM THE
I-O
C
ONFIGURATION
U
TILITY
CD
OR FROM
I-
O’
S
ftp site:
ftp://ftp.iocorp.com/Host_Print/adaptio
