iMars BD3KTL-PS Energy Storage Inverter Safety precautions
4
All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
Do not open the enclosure when the inverter is working or any circuits is
connecting to the inverter.
1.5 Maintenance & Replacement
Do not disassemble this inverter yourself. It contains no user-serviceable
parts. Attempt to service this inverter yourself may cause a risk of
electrical shock or fire and will void the warranty from the manufacturer.
Only certified electriciuans are allowed to maintain, troubleshoot, and
replace the inverter.
Please contact the distributor or manufacturer if need maintenance.
Temporary warning signs or fences must be placed to prevent
unauthorized personnel from entering the maintenance area.
Authorized service personnel should reduce the risk of electrical shock by
disconnecting AC and battery from the inverter before attempting any
maintenance or cleaning or working on any circuits connected to the
inverter. Turning off controls will not reduce this risk. Internal capacitors
can remain charged for 5 minutes after disconnecting all sources of
power.
Please observe the static electricity protection regulations and do well in
anti-static measures because there are mostly electrostatic sensitive
circuits and devices in the internal.
Use only recommended accessories from installer. Otherwise,
not-qualified tools may cause a risk of fire, electric shock, or injury to
persons.
Do not touch an energized inverter, because the heat sink reaches a high
temperature.
Contact your supplier if all the condition are OK but the fault still exists.
Do not close or touch any charged metal conductor parts of the running
system, otherwise it may cause a risk of electric shock or fire.
Please pay attention to any safety signs and instructions.
