iMars BD3KTL-PS Energy Storage Inverter Display panel
36
(4)
System Information
Press “
” and “
” in the main interface to select “System Information”, and then press “ENT” to
view the parameters which is shown in figure 6.7.
System Info.
Part No.
Serial No.
Soft Ver.
Figure 6.7 System information
The system information includes
“product model”, “serial No.”, “software version”, “Grid standard”
and “Grid parameters”.
(5)
Fault
Press “
” and “
” in the main interface to review the current fault, and then press “ENT” to view
the sub-menu which is shown in figure 6.8.
F a u l t
1 : 0 3 6 G r i d l o s s
2 : 0 4 7 C A N e r r o r
3 :
1
Figure 6.8 Fault information
There are 8 pieces of fault information in the record which is shown in figure 6.8; otherwise it will
display “No Fault!” Refer to chapter 8 for more detailed information.
(6)
Inverter control
Press “
” and “
” in the control interface, and then press “ENT” to view the sub-menu which is
shown in figure 6.9.
C o n t r o l M e n u
O n / O f f
C l e a r
R e s t a r t
Figure 6.9 Control interface
Refer to the table as below for detailed information.
Table 6-4 Inverter control
