INVT iMars BD3KTL-PS, Operation Manual

Page: 37 / 49

iMars BD3KTL-PS Energy Storage Inverter Display panel
32
Setting
item
LCD display Instruction
Setup
battery
type
Curr.Type:
Li
锂电池
Li
Lead
Enter into the interface and select
battery type through “ ” or “ ”. And
then press “ENT” again to save the
edition and press “ESC” to exit.
Setup
battery
protocol
Curr.Protocol :
Pylon
锂电池
Pylon
Yinlong
Sunwoda
Enter into the interface and select
battery protocol through “ ” or “ ”.
And then press “ENT” again to save the
edition and press “ESC” to exit.
Setup
charge
volt
Charge volt:
53.0V
Enter into the interface and change
charge volt through “ ” or “ ”. And
then press “ENT” again to save the
edition and press “ESC” to exit.
Setup
charge
current
Charge current:
30.0A
Enter into the interface and change
charge current through “ ” or “ ”.
And then press “ENT” again to save the
edition and press “ESC” to exit.
Setup
discharge
critical
volt
Critical volt:
46.0V
Enter into the interface and change
discharge critical volt through “ ” or
“ ”. And then press “ENT” again to
save the edition and press “ESC” to
exit.
Setup
discharge
resume
volt
Resume volt:
48.0V
Enter into the interface and change
discharge resume volt through “ ” or
“ ”. And then press “ENT” again to
save the edition and press “ESC” to
exit.
Setup
charge
start
time1
Charge start time1:
00:00
Enter into the interface and change
charge start time 1 through “ ” or “ ”.
And then press “ENT” again to save the
edition and press “ESC” to exit.