iMars BD3KTL-PS Energy Storage Inverter Safety precautions
2
Symbols
Name
Instruction
Abbreviation
Danger
Danger
Serious physical injury or even death may
occur if not follow the relative requirements
Warning
Warning
Physical injury or damage to the devices
may occur if not follow the relative
requirements
Do not
Do not
Damage may occur if not follow the relative
requirements
Hot surface
Hot
surface
Sides of the device may become hot. Do
not touch.
Note
Note
Physical hurt may occur if not follow the
relative requirements
Note
1.2 Safety guidance
Before performing maintenance tasks, power off the inverter, disconnect
all circuits and wait at least 5minutes.
Please check the product package upon receiving the product. If there
is any question, please contact the transportation company and local
distributor immediately.
Use only recommended accessories from installer. Otherwise,
not-qualified tools may cause a risk of fire, electric shock, or injury to
persons.
Ensure there is no strong electromagnetic interference which is
generated by other electronic/electrical devices around the installation
location.
Do not disassemble this inverter yourself. It contains no
user-serviceable parts. Attempt to service this inverter yourself may
cause a risk of electrical shock or fire and will void the warranty from the
manufacturer.
This inverter is heavy. It should be lifted by at least two persons.
To avoid a risk of fire and electric shock, make sure that existing wiring
is in good condition and that the wire is not undersized. Do not operate
the inverter with damaged or substandard wiring.
AC breaker and Battery circuit breaker are used as disconnect devices
and these disconnect devices shall be easily accessible.
The shell or radiator may become hot during inverter running. Do not
touch to avoid hurt.
