iMars BD3KTL-PS Energy Storage Inverter Display panel
28
Run
Warn
Fault
Stop work with some warning that can be
recoverable after restart or power is
ready .
Run
Warn
Fault
Stop work with fault that can be
recoverable immediately.
6.2 Operation panel
6.2.1 Button instruction
“ESC”: Return and exit
“
∧
”: back to the front page or data increasing;
“
∨
”: to the next page or data decreasing;
“ENT”: enter.
6.2.2 LCD screen
Figure 6.1 Main interface of LCD display
All information is displayed on the LCD screen. The background illumination of LCD screen will go
out to save power if there is not button operation in 15 seconds. But it can be activated by pressing
any button. Press “ENT” to enter into the main interface if the background illumination is on. All
parameters can be viewed and set on the interface.
There are main interface and menu interfaces on the LCD screen, of which the main interface is
the default one after power on, while the menu interfaces are used to watch and set parameters or
other manual operation, such as viewing the monitoring parameters, system information, statistics
and fault information and setting the displayed language, time, communication address, password
and factory defaults.
