Invisible Systems Limited
P a g e
|
7
7-9 Beetham Road, Milnthorpe Cumbria, LA7 7QL, England
Phone: 01539 722 520 Email: [email protected]
QC0150 Mains Powered Modbus Transmitter
Installation Manual
4.
Requirements prior to Install.
Information Needed from allocated metering positions.
Meter Type/Model
Quantity
Circuit Names
Modbus Address
Registar Reads Required
Confirmation of compatable Baud Rate Settings
Confirmation of compatable Parity Settings
The below table will need to be filled in prior to receiveing the Modbus Transmitter as it will be
programmed to your specific requirements. This can be emailed to you by Invisible Systems Ltd prior
to equipment being sent. Ref QC0151.
It is Advised that the maximum number of registar addresses on one Modbus Transmitter be 30.
This Info will be used to set up your Realtime Online Portal by Invisible Systems Prior to installation.