Invisible Systems Limited
P a g e
|
8
7-9 Beetham Road, Milnthorpe Cumbria, LA7 7QL, England
Phone: 01539 722 520 Email: [email protected]
QC0150 Mains Powered Modbus Transmitter
Installation Manual
5.
Preparation
Ensure the area you are going to be working in is clean and tidy. This
includes any tools or equipment you have are stored neatly away so as to
ensure there is no trip hazard.
Find a suitable location for mounting the Modbus Transmitter. Clear of
obstacles, on a flat dry surface not in close proximity to water. Also
ensure there are no buried cables or pipe work close to a power outlet.
Note
It is advised that if where possible the Modbus Transmitter is fitted to a
5amp switched fused spur to ensure inadvertant disconnection from
supply. Refer to qualified electrician should this be needed.
Example below shows a Modbus Transmitter fitted to associated meters with a reciever in
situe also